How to Fix HP LaserJet Printer error codes?

HP LaserJet Printer error codes

HP LaserJet printers are the first printers in the market that had the laser-printing feature. These printers were doubted for errors, as it was the first into the market. But it has been able to break through such barriers and come to the top printer models. Make sure, you complete the HP printer setup properly.

However, there have been some of the technical errors that come up. Moreover, in this article, you will get to know why they occur and also the troubleshooting steps.

Error code 13.1

  • This error code arises when there is a jam in tray 2
  • You can find this if you do not keep the length of the paper guide width to the paper that you keep
  • Check that the setting of the tray length is set to the correct size of the paper
  • Avoid loading damaged or unspecified paper

If the problem persists, check the Tray 2 Paper Pick-up Roller's condition

  1. Check for free spins of the pick-up roller. If the roller is spinning freely, this should not happen
  2. Check for harm or wear on the pick roller. If needed, replace the pick-up roller

Error code 41.3

  • If the configuration of the paper is not proper, you will see this error for sure
  • Reload the tray with the right size of paper
  • Make sure the size of the paper specified in the software, the printer driver, and the control panel are the same
  • Click the OK button and scroll to option TRAY size =
  • Reconfigure the size of a tray to match it to the print job size
  • If the mistake is not evident, switch off and then switch on the HP LaserJet Printer

Error code 02

  • This is a warming up error which is mostly with the printer cable or driver problem
  • Turn off the printer and remove the cable of the printer (USB or I / O cable) and switch it on again
  • If the printer reports "Ready," the driver will be updated first, and the printer cable will be updated if not
  • If an error still exists, a hardware issue may be the reason

There are many more codes that you may end up with, for solutions, contact our customer care team.